收藏本站
SiGe High-Linearity, 815MHz to 995MHz
Downconversion Mixer with LO Buffer/Switch
Pin Description
PIN
1, 6, 8, 14
2
3
4, 5, 10, 12,
13, 17
7
9
11
15
16
18, 19
20
EP
NAME
V CC
RF
TAP
GND
LOBIAS
LOSEL
LO1
LO2
LEXT
IF-, IF+
IFBIAS
GND
FUNCTION
Power-Supply Connection. Bypass each V CC pin to GND with capacitors as shown in the Typical
Application Circuit .
Single-Ended 50 ? RF Input. This port is internally matched and DC shorted to GND through a balun.
Requires an external DC-blocking capacitor.
Center Tap of the Internal RF Balun. Bypass to GND with capacitors close to the IC, as shown in the
Typical Application Circuit .
Ground
Bias Resistor for Internal LO Buffer. Connect a 619 ? ± 1% resistor from LOBIAS to the power supply.
Local Oscillator Select. Logic control input for selecting LO1 or LO2.
Local Oscillator Input 1. Drive LOSEL low to select LO1.
Local Oscillator Input 2. Drive LOSEL high to select LO2.
External Inductor Connection. Connect a low-ESR, 30nH inductor from LEXT to GND. This inductor
carries approximately 140mA DC current.
Differential IF Outputs. Each output requires external bias to V CC through an RF choke (see the
Typical Application Circuit ).
IF Bias Resistor Connection for IF Amplifier. Connect a 953 ? ± 1% resistor from IFBIAS to GND.
Exposed Ground Paddle. Solder the exposed paddle to the ground plane using multiple vias.
Detailed Description
The MAX9986 high-linearity downconversion mixer
provides 10dB of conversion gain and +23.6dBm of
IIP3, with a typical 9.3dB noise figure. The integrated
baluns and matching circuitry allow for 50 ? single-
ended interfaces to the RF and the two LO ports. A sin-
gle-pole, double-throw (SPDT) switch provides 50ns
switching time between the two LO inputs with 49dB of
LO-to-LO isolation. Furthermore, the integrated LO
buffer provides a high drive level to the mixer core,
reducing the LO drive required at the MAX9986 ’s
inputs to a -3dBm to +3dBm range. The IF port incor-
porates a differential output, which is ideal for provid-
ing enhanced IIP2 performance.
Specifications are guaranteed over broad frequency
ranges to allow for use in cellular band GSM,
cdma2000, iDEN, and W-CDMA 2G/2.5G/3G base sta-
tions. The MAX9986 is specified to operate over a
815MHz to 995MHz RF frequency range, a 960MHz to
1180MHz LO frequency range, and a 50MHz to
250MHz IF frequency range. Operation beyond these
ranges is possible; see the Typical Operating
Characteristics for additional details.
RF Input and Balun
The MAX9986 RF input is internally matched to 50 ? ,
requiring no external matching components. A DC-
blocking capacitor is required because the input is inter-
nally DC shorted to ground through the on-chip balun.
LO Inputs, Buffer, and Balun
The MAX9986 is ideally suited for high-side LO injec-
tion applications with a 960MHz to 1180MHz LO fre-
quency range. For a device with a 570MHz to 850MHz
LO frequency range, refer to the MAX9984 data sheet.
As an added feature, the MAX9986 includes an internal
LO SPDT switch that can be used for frequency-hop-
ping applications. The switch selects one of the two
single-ended LO ports, allowing the external oscillator
to settle on a particular frequency before it is switched
in. LO switching time is typically less than 50ns, which
is more than adequate for virtually all GSM applica-
tions. If frequency hopping is not employed, set the
switch to either of the LO inputs. The switch is con-
trolled by a digital input (LOSEL): logic-high selects
LO2, logic-low selects LO1. To avoid damage to the
part, voltage must be applied to V CC before digital
logic is applied to LOSEL. LO1 and LO2 inputs are
internally matched to 50 ? , requiring only a 82pF DC-
blocking capacitor.
8
_______________________________________________________________________________________
发布紧急采购，3分钟左右您将得到回复。

采购需求

(若只采购一条型号，填写一行即可)

发布成功！您可以继续发布采购。也可以进入我的后台，查看报价

发布成功！您可以继续发布采购。也可以进入我的后台，查看报价

*型号 *数量 厂商 批号 封装
添加更多采购

我的联系方式

*
*
*
相关PDF资料
MAX9986EVKIT EVAL KIT FOR MAX9986
MAX9987ETP+ IC BUFFER/SPLITTER LO 20-TQFN
MAX9988EVKIT EVAL KIT FOR MAX9988
MAX9989ETP+T IC BUFFER LO 20-TQFN
MAX9990EVKIT EVAL KIT FOR MAX9990
MAX9993ETP+D IC MIXER DOWN CONV 20-TQFN
MAX9993EVKIT EVAL KIT FOR MAX9993
MAX9994ETP+T IC MIXER DOWN CONV 20-TQFN
相关代理商/技术参数
MAX9986ETP-T 功能描述:上下转换器 SiGe 815-1000MHz Downconversion Mixer RoHS:否 制造商:Texas Instruments 产品:Down Converters 射频:52 MHz to 78 MHz 中频:300 MHz LO频率: 功率增益: P1dB: 工作电源电压:1.8 V, 3.3 V 工作电源电流:120 mA 最大功率耗散:1 W 最大工作温度:+ 85 C 安装风格:SMD/SMT 封装 / 箱体:PQFP-128
MAX9986EVKIT 功能描述:射频开发工具 RoHS:否 制造商:Taiyo Yuden 产品:Wireless Modules 类型:Wireless Audio 工具用于评估:WYSAAVDX7 频率: 工作电源电压:3.4 V to 5.5 V
MAX9987EGP 制造商:Maxim Integrated Products 功能描述:14DBM TO 20DBM LO BUFFER/SPLITTER WITH +/-1DB - Rail/Tube
MAX9987EGP-T 制造商:Maxim Integrated Products 功能描述:14DBM TO 20DBM LO BUFFER/SPLITTER WITH +/-1DB - Tape and Reel
MAX9987ETP 功能描述:射频放大器 14dBm to 20dBm LO Buffer/Splitter RoHS:否 制造商:Skyworks Solutions, Inc. 类型:Low Noise Amplifier 工作频率:2.3 GHz to 2.8 GHz P1dB:18.5 dBm 输出截获点:37.5 dBm 功率增益类型:32 dB 噪声系数:0.85 dB 工作电源电压:5 V 电源电流:125 mA 测试频率:2.6 GHz 最大工作温度:+ 85 C 安装风格:SMD/SMT 封装 / 箱体:QFN-16 封装:Reel
MAX9987ETP+ 功能描述:射频放大器 14dBm to 20dBm LO Buffer/Splitter RoHS:否 制造商:Skyworks Solutions, Inc. 类型:Low Noise Amplifier 工作频率:2.3 GHz to 2.8 GHz P1dB:18.5 dBm 输出截获点:37.5 dBm 功率增益类型:32 dB 噪声系数:0.85 dB 工作电源电压:5 V 电源电流:125 mA 测试频率:2.6 GHz 最大工作温度:+ 85 C 安装风格:SMD/SMT 封装 / 箱体:QFN-16 封装:Reel
MAX9987ETP+T 功能描述:射频放大器 14dBm to 20dBm LO Buffer/Splitter RoHS:否 制造商:Skyworks Solutions, Inc. 类型:Low Noise Amplifier 工作频率:2.3 GHz to 2.8 GHz P1dB:18.5 dBm 输出截获点:37.5 dBm 功率增益类型:32 dB 噪声系数:0.85 dB 工作电源电压:5 V 电源电流:125 mA 测试频率:2.6 GHz 最大工作温度:+ 85 C 安装风格:SMD/SMT 封装 / 箱体:QFN-16 封装:Reel
MAX9987ETP-T 功能描述:射频放大器 14dBm to 20dBm LO Buffer/Splitter RoHS:否 制造商:Skyworks Solutions, Inc. 类型:Low Noise Amplifier 工作频率:2.3 GHz to 2.8 GHz P1dB:18.5 dBm 输出截获点:37.5 dBm 功率增益类型:32 dB 噪声系数:0.85 dB 工作电源电压:5 V 电源电流:125 mA 测试频率:2.6 GHz 最大工作温度:+ 85 C 安装风格:SMD/SMT 封装 / 箱体:QFN-16 封装:Reel